Oc192/Stm64 Sr/Sh 4 Port 1310 Specifications - Cisco ONS 15600 Reference Manual

A.2.6 OC192/STM64 SR/SH 4 Port 1310 Specifications
A.2.6 OC192/STM64 SR/SH 4 Port 1310 Specifications
Table A-8
Table A-8
Specification Type
Line
Transmitter
Receiver
Loopback mode
Connectors
Operating temperature
Operating humidity
Dimensions
Compliance
Cisco ONS 15600 Reference Manual, R6.0
A-10
shows the OC192/STM64 SR/SH 4 Port 1310 card specifications.
OC192/STM64 SR/SH 4 Port 1310 Card Specifications
Description
Bit rate: 9.96 Gbps
Code: Scrambled NRZ
Fiber: 1310 nm single mode
Max. transmitter output power: –1 dBm
Min. transmitter output power: –6 dBm
Center wavelength: 1290 nm to 1330 nm
Nominal wavelength: 1310 nm
Max. receiver level: –1 dBm
Min. receiver level: –11 dBm
Link loss budget: –5 dB min., with no dispersion or 4 dB optical path loss at
–12
BER = 1
Payload
Note You must use a 3-dBm fiber attenuator when connecting a fiber
loopback to an OC192/STM64 SR/SH 4 Port 1310 card. Never
connect a direct fiber loopback.
OGI
23 to 122 degrees Fahrenheit (–5 to +50 degrees Celsius)
5 to 95%, noncondensing
Height: 16.50 in. (419 mm)
Width: 1.50 in. (38 mm)
Depth: 18.31 in. (465 mm)
Card weight: 12.0 lb (5.44 kg)
SONET Telcordia GR-253
When installed in a system, ONS 15600 cards comply with these safety
standards: UL 60950, CSA C22.2 No. 950, EN 60950, IEC 60950
Eye safety compliance: Class 1 (21 CFR 1040.10 and 1040.11) and Class 1
(IEC 60825) laser products
including dispersion
Appendix A Hardware Specifications