Care And Maintenance - Sharp FP-G50J Operation Manual

CARE AND MAINTENANCE

To maintain optimum performance of this air purifier, please clean the unit including the filter
periodically.
Be sure to disconnect the power cord from the wall outlet before performing any maintenance.
BACK PANEL
Back Panel
NOTE
Back Panel
FILTERS
HEPA Filter
Tag
Deodorizing Filter
UNIT
OM_FP-G50J_EN.indd 8
(Pre-filter)
Gently remove dust from the back panel, using a vacuum
cleaner attachment or similar tool.
CAUTION
Do not apply excessive pressure, when scrubbing the back
panel.
How to clean hard to remove dirt
1. Add a small amount of kitchen detergent to water and soak
for about 10 minutes.
2. Rinse off the kitchen detergent with clean water.
3. Completely dry the filter in a well-ventilated area.
Gently remove dust from HEPA Filter and Deodorizing Filter with a vacuum
cleaner attachment or similar tool.
CAUTION
Do not WASH in water and DRY in the sun.
The filters are fragile, be careful not to apply too much force.
• HEPA Filter
Apply the maintenance only on the side with the tag.
Do not clean the opposite side; otherwise, the filter will be
damaged.
• Deodorizing Filter
The maintenance can be applied to the both sides.
Wipe with a dry, soft cloth
For stubborn stains or dirt, use a soft cloth dampened with warm water.
CAUTION
•Do not use volatile fluids
Benzine, paint thinner, polishing powder, etc., may damage the surface.
•Do not use detergents
Detergent ingredients may damage the unit.
E-8
2017/01/10 16:47:37