Specifications - Sharp FP-G50J Operation Manual

SYMPTOM
AUTO RESTART
After a power failure, automatically
resume the operation when the
power recovers.
ON
(with the unit OFF)
(simultaneously for more than 3 sec.)

SPECIFICATIONS

Power supply
Fan
Speed
Operation
Recommended Room Size
High density Plasmacluster ion recommended room size
Cord Length
Dimensions
Weight
*1 The fan speed is automatically switched depending on the amount of impurities in the air.
*2 Size of a room which is appropriate for operating the unit at maximum fan speed.
• It indicates the space where a certain amount of dust particles can be removed in 30 minutes
(JEM1467).
*3 Size of a room in which approximately 7000 ions can be measured per cubic centimeter in the
center of the room (at a height of approximately 1.2 meters from the floor) when the product is
placed next to a wall and run at the MED operation position.
Standby Power
OM_FP-G50J_EN.indd 11
Auto Restart can be set.
• Even when the plug is unplugged or the breaker is thrown
during the operation, the operation resumes at the previous
operation mode and settings if the power recovers.
If the ,
for 10 seconds, the setting is completed.
Fan Speed Adjustment
Rated Power
Fan Speed
In order to operate the electrical circuits while the power plug is inserted in the
wall outlet, this product consumes about 1.0W of standby power.
For energy saving, unplug the power cord when the unit is not in use.
REMEDY (not a malfunction)
OFF
(with the unit OFF)
(simultaneously for more than 3 sec.)
, lamp Lights up
220-240V
MAX
47W
306m 3 /hour 186m
~40m
~23m
383mm(W)x209mm(D)x540mm(H)
E-11
50-60Hz
MED SLEEP *1
16W 4.0~5.5W
3 /hour 48~90m 3 /hour
2 *2
2 *3
2.0m
5.1kg
2017/01/10 16:47:43