ELEC
2. Check for smooth operation. Turn the pin-
ion counterclockwise to check that it
operates smoothly and turn it clockwise
to check that it locks in place.
Disassembling the starter motor
1. Remove the magnet switch a and spring
b.
2. Slide the pinion stopper c down, and
then remove the clip d.
d
c
c
3. Remove the pinion stopper c, pinion e,
and spring f.
5-43
Electrical system
b
a
d
c
e
f
4. Remove the bolts g, and then disassem-
ble the starter motor.
g
5. Remove the rubber seal h, lever i, and
pinion shaft assembly j.
j
6. Remove the stator k.
7. Remove the armature l with the brush
holder assembly m from the bracket n.
k
i
h
l
m
n