Installing The Flushing Hose; Installing The Cowling Lock Lever; Installing The Ptt Switch - Yamaha F150B Service Manual

BRKT

Installing the flushing hose

1. Pass the flushing hose a, trim sensor
lead a, and PTT motor leads b through
the grommet b, and then fasten them
with plastic ties c around the grommet
b.
b
a
a
b
c
c
c
TIP:
Align the white paint mark c on the flushing
hose a with the outer end of the grommet d.

Installing the cowling lock lever

1. Install the cowling lock lever a and lever
b.
b
2. Install the spring c.
9-9
Bracket unit
b
c
c
a
a
b
a
3. Apply grease into the housing d until
grease comes out from the cowling lock
lever bushing.

Installing the PTT switch

1. Install the gasket a and PTT switch b
with in the holder c onto the bottom
cowling.
A
STBD
B
PORT
A
Regular rotation model
B
Counter rotation model
c
d
a
c
b
c
a
b