Removing the upper case
1. Drain the remained engine oil. See "Dis-
assembling the upper case" (9-17) step
1.
2. Disconnect the ground lead a and
adapter b.
3. Loosen the upper mount bracket bolts c
and lower mount cover bolts (PORT and
STBD) d.
a
b
4. Remove the upper mounting nuts e and
lower mounting nuts f, and then remove
the upper case assembly.
e
f
Installing the upper case
1. Install the upper mounts a and bolts b.
c
d
a
b
Upper case and mounts
2. Install the upper mount bracket c, and
then tighten the upper mount bracket
bolts d temporarily.
a
d
c
a
a
3. Install the lower mounts e and bolts f.
4. Install the lower mount covers g, and
then tighten the lower mount cover bolts
h temporarily.
e
e
0
b
1
b
2
3
4
5
f
6
f
7
g
h
8
9
10
A
9-14