Changing The Engine Oil - Yamaha RAPTOR YFM700RF 2015 Service Manual

1
1
b
a
Recommended brand
YAMALUBE
Type
SAE 5W-30, 10W-30, 10W-40,
15W-40, 20W-40 or 20W-50
Recommended engine oil grade
API service SG type or higher,
JASO standard MA
0 10 30 50
SAE 5W-30
SAE 10W-30
SAE 10W-40
SAE 15W-40
–20 –10 0 10
ECA1S3L023
NOTICE
• Engine oil also lubricates the clutch and the
wrong oil types or additives could cause
clutch slippage. Therefore, do not add any
chemical additives or use engine oils with a
grade of CD "c" or higher and do not use
oils labeled "ENERGY CONSERVING II"
"d".
• Do not allow foreign materials to enter the
crankcase.
70 90 110 130 ˚F
SAE 20W-40
SAE 20W-50
20 30 40 50 ˚C
3-10
4. Start the engine, warm it up for several min-
utes, and then turn it off.
5. Check the engine oil level again.
TIP
Before checking the engine oil level, wait a few
minutes until the oil has settled.
EAS20800

CHANGING THE ENGINE OIL

1. Start the engine, warm it up for several min-
utes, and then turn it off.
2. Place a container under the engine oil drain
bolt.
3. Remove:
• Engine oil filler bolt "1"
• Dipstick "2"
1
4. Remove:
• Engine oil drain bolt (oil tank) "1"
(along with the gasket)
5. Remove:
• Engine oil drain bolt (crankcase) "1"
(along with the gasket)
ENGINE
2
1
1