Table of Contents
Advertisement
granted. The encryption method used is referred to as the
Temporal Key Integrity Protocol (TKIP).
WPA MODE: In this setting, user can choose WPA or WPA2 or WPA
& WPA2. (WPA2 is far superior to WPA, because the encryption of
method used is Advanced Encryption Standard (AES).)
Share Key: User should define the pre-share key in here; the
length of the key is (8-23 characters).
WPA Encryption: User can choose the encryption method of the
pre-shared key here; there are three options: Auto, AES and TKIP.
WPA-enterprise:
WPA-Enterprise includes all of the features of WPA-PSK plus
support the 802.1x authentication. To use this function, a separate
RADIUS server is required
User should enter their account and password to pass the
authentication.
Please Note: In wifi station model, the security setting must be same as
the AP that user wish to connect.
3.4.4.3 WIFI ath4~7 Setting
General
Radio Power: Turn this interface on or off
Wireless Mode: Select which wireless mode that user wants to use.
The options available here are: 802.11a, 802.11b, 802.11g and
802.11b+g.
SSID: The SSID (service set identifier) is an identifier of an AP in
user's wireless network. The SSID must be identical for all points
in the network. It is case sensitive and maximum length is 32.
SSID Hide: This function is to hide the SSID in the wireless net
work.
Country: This setting configures the access point's country code,
which identify the country of operation and sets the authorized
Figure 3-4-26
Figure 3-4-27
72
Advertisement
Table of Contents
