Table of Contents
Advertisement
Access
The Access table grants the groups access right to certain views.
Each group can have multiple access rights. The most secure
access right is chosen.
Index: Index of Access. Tick the checkbox to enable recordset.
Group: Returned and lookup the 'Group Name' from the Group
table.
Security model: Specified in the message's msgSecurityModel
parameter. The available options for this field are: any, v1, v2c
and usm.
Security level: Specified in the message's msgFlags parameter.
The available options for this field are: NoauthNoPriv, AutoNoPriv
and AuthPriv
Read: Specified in the message's msgSecurityModel parameter.
The available options for this field are: all, none, mib2 and the
'View Name' from View table.
Write: Authorized View Name for write access. The available
options for this field are: all, none, mib2 and the 'View Name' from
View table.
Notify: Authorized View Name for notify access. The available
options for this field are: all, none, mib2 and the 'View Name' from
View table.
3.8.5.3 SNMP Trap
It is an SNMP application that uses the SNMP TRAP operation to send
information to a network management system.
SNMP Trap
Trap Active: To enable or disable SNMP Trap function.
Version: Indicate the traps will be sent in v1 or v2c or not send
(disable).
v1/v2c Trap
IP Address & Port: The IP and Port to receive traps.
Community: The community string to be used when sending traps.
v3 Trap
Trap: Index of SNMP v3 traps. Tick the checkbox to enable
recordset.
User: The usm User ID.
IP Address & Port: The IP and Port of a device to receive traps.
Auth Level: Assign security level in this record. The Options are:
Figure 3-8-37
172
Advertisement
Table of Contents
