Table of Contents
Advertisement
The Access table grants the groups access right to certain views.
Each group can have multiple access rights. The most secure
access right is chosen.
Index: Index of Access. Tick the checkbox to enable recordset.
Group: Returned and lookup the 'Group Name' from the Group
table.
Security model: Specified in the message's msgSecurityModel
parameter. The available options for this field are: any, v1, v2c
and usm.
Security level: Specified in the message's msgFlags parameter.
The available options for this field are: NoauthNoPriv, AutoNoPriv
and AuthPriv
Read: Specified in the message's msgSecurityModel parameter.
The available options for this field are: all, none, mib2 and the
'View Name' from View table.
Write: Authorized View Name for write access. The available
options for this field are: all, none, mib2 and the 'View Name' from
View table.
Notify: Authorized View Name for notify access. The available
options for this field are: all, none, mib2 and the 'View Name' from
View table.
3.3.5.3 SNMP Trap
It is an SNMP application that uses the SNMP TRAP operation to send
information to a network management system.
SNMP Trap
Trap Active: To enable or disable SNMP Trap function.
Version: Indicate the traps will be sent in v1 or v2c or not send
(disable).
v1/v2c Trap
IP Address & Port: The IP and Port to receive traps.
Community: The community string to be used when sending traps.
v3 Trap
Trap: Index of SNMP v3 traps. Tick the checkbox to enable
recordset.
User: The usm User ID.
IP Address & Port: The IP and Port of a device to receive traps.
Auth Level: Assign security level in this record. The Options are:
NoAuthNoPriv, AuthNoPriv, AuthPriv.
Figure 3-3-37
56
Advertisement
Table of Contents
