Table of Contents
Advertisement
interval of time when the WMM AP has the right to initiate
transmissions on the wireless network.
ACM: Admission control mandatory.
3.9.5.2 WIFI MESH Setting
General
Radio Power: Turn this interface on or off
Wireless Mode: Select which wireless mode that you want to use.
The options available here are: 802.11a, 802.11b, 802.11g and
802.11b+g.
SSID: The SSID (service set identifier) is an identifier of an AP in
user's wireless network. The SSID must be identical for all access
points in the network. It is case sensitive and maximum length is
32.
SSID Hide: This function is to hide the SSID in the wireless net
work.
Country: This setting configures the access point's country code,
which identify the country of operation and sets the authorized
radio channels.
Channel: Set the operating frequency/channel for this device.
Advanced Settings
Peer Node Distance: Set the distance between this device and it's
adjacent. If select 'manual', the distance will be determined by
'Slot time', 'ACK timeout' and 'CTS timeout' three values.
Beacon Period: This item contains the length of the beacon interval.
Enter a value between 20 and 1000 to specify the Beacon Period.
DTIM Period: This item contains the number of Beacon intervals
between Delivery Traffic Indication Message (DTIM). Enter a
Figure 3-9-32
Figure 3-9-33
194
Advertisement
Table of Contents
