Table of Contents
Advertisement
3.5.4.1 Rogue AP Scan
Rogue Enable
Check the radio box in front of <Enable> to enable the Rogue AP
detection, and Press <Add> or <Del> button to apply.
Allow AP
The allowable AP list. The AP in the list is a legal AP for CB to
connect. Check the box and press the <Del> button to remove it.
Rogue AP
The nearby AP list, not include the allowed APs. Check the box and
press the <Add> button to add it as a legal AP.
Re-Scan
Press <WIFIx> button to Re-scan the APs nearby which are
scanned by wifi card x (x:1 or 2)
3.5.4.2 WIFI ath3 and ath7 Settings
General
Radio Power: Turn this interface on or off
Wireless Mode: Select which wireless mode that user wants to use.
The options available here are: 802.11a, 802.11b, 802.11g and
802.11b+g.
SSID: The SSID (service set identifier) is an identifier of an AP in
Figure 3-5-22
Figure 3-5-23
95
Advertisement
Table of Contents
