Table of Contents
Advertisement
3.2.1.1 Administrator
By selecting the item of Administrator under System, User will see the
screen shown in Figure 3-2-2. These settings allow user to configure
the device Name, language, model, password, remote management
and WIFI Loading Warning Threshold.
Device Name
This is a host name or system name for the device. The maximum
length is 20 characters. User can only input '0'~'9', 'a'~'z', 'A'~'Z',
'_' or '-'.
Language Select
This function allows user to select a language for the UI, the
options available are: English, Simplified Chinese and Traditional
Chinese.
Model Select
OLSR-AP: To set this device as an AP with layer 3 MESH function.
AODV-AP: To set this device as an AP with layer 3 MESH function.
AP-Bridge: To set this device as a normal AP.
AP-CB-Bridge: To set this device as an AP and Client Bridge device.
AP-CB-ROUTE: To set this device as a router device with AP and CB
functions.
CB-CB-ROUTE: To set this device as a router device with dual CB
functions.
VLAN-AP: To set this device as a VLAN AP device. Each SSID can
have its own VLAN ID.
AP_WDS_BRG: To set this device as a WDS device with AP
function.
AP4_WDS_BRG: To set this device as WDS device with AP function
and support up to 4 SSID.
Figure 3-2-1
13
Advertisement
Table of Contents
