Lantech IWP-2000-68 User Manual page 144

802.11a/b/g dual radio outdoor multi-function wireless access point
Table of Contents

Advertisement

other.
WEP Key Setting: It uses two kinds of WEP Encryption key length:
5-bytes and 13-bytes. The key format can either use 'ASCII' to set
the key values (ie. 0~9, a~z) Or use 'HEX' to set the key value in
hexadecimal. (ie. 0~9, a~f). User can set maximum 4 keys, but
only one key will functional at one time.
WDS MAC Address Setting
MAC Address: In WDS function, user should enter the MAC address
that indicates which AP to connect to.
SSID Security Mode
Authentication: User can choose which authentication type to
secure the wireless net work. There are four options for
authentication: Disable, WEP, WPA-personal and WPA-enterprise.
WEP: Short for Wired Equivalent Privacy, a security protocol for
wireless local area networks (WLANs) defined in the 802.11
standard.
Open or Restricted: An open system allows any client to
authenticate as long as it conforms to any MAC address filter
policies that may have been set. All authentication packets are
transmitted without encryption. If the 'Restricted' selected, all the
packets are transmitted with encryption.
Select Key: Check the radio box in front of the key you would like
to use for this AP.
Figure 3-7-20
Figure 3-7-21
Figure 3-7-22
138

Advertisement

Table of Contents
loading

Table of Contents