Table of Contents
Advertisement
3.2.5.3 SNMP Trap
It is an SNMP application that uses the SNMP TRAP operation to send
information to a network management system.
SNMP Trap
Trap Active: To enable or disable SNMP Trap function.
Version: Indicate the traps will be sent in v1 or v2c or not send
(disable).
v1/v2c Trap
IP Address & Port: The IP and Port to receive traps.
Community: The community string to be used when sending traps.
v3 Trap
Trap: Index of SNMP v3 traps. Tick the checkbox to enable
recordset.
User: The usm User ID.
IP Address & Port: The IP and Port of a device to receive traps.
Auth Level: Assign security level in this record. The Options are:
NoAuthNoPriv, AuthNoPriv, AuthPriv.
Trap Items
Enable/Disable which trap items to send.
Figure 3-2-30
Figure 3-2-31
32
Advertisement
Table of Contents
