Table of Contents
Advertisement
Password Settings
If user wants to change the password for admin account, the user
should enter the current password, a new password and, re-type
the new password.
The Idle Time Out is the amount of time of inactivity allowed before
user proceeds next action. The user needs to re-login if the idle
time passes timeout
Remote Management
User can enable/disable the management of the Access Point from
a remote host. Just tick the <Enable> check box and enter an IP
address of the remote host. Then, only the host with the entered IP
address can access this device.
WIFI Loading Warning Threshold
The threshold value is used by Lantech-Wireless-View.
Lantech-Wireless-View will monitor the WIFI loading, when the
loading is over this value, Lantech-Wireless-View will change the
color of the link line on network topology to notify the user about
condition of the link quality. The threshold value is between 5 and
25.
3.8.1.2 Firmware Update
By selecting the item of Firmware under System, User will see the
screen shown in Figure 3-8-3. This page shows current firmware
version and date. This page also allow user to using TFTP or WEB or FTP
method to upgrade to the new version of firmware.
Figure 3-8-2
150
Advertisement
Table of Contents
