Table of Contents
Advertisement
3.8.3.1 WIFI ath0 Setting
General
Radio Power: Turn this interface on or off
Wireless Mode: Select which wireless mode that user wants to use.
The options available here are: 802.11a, 802.11b, 802.11g and
802.11b+g.
SSID: The SSID (service set identifier) is an identifier of an AP in
user's wireless network. The SSID must be identical for all points
in the network. It is case sensitive and maximum length is 32.
Country: This setting configures the access point's country code,
which identifies the country of operation and sets the authorized
radio channels.
Channel: Set the operating frequency/channel for user's AP.
Advanced Settings
Peer Node Distance: Set the distance between this device and it's
adjacent. If select 'manual', the distance will be determined by
'Slot time', 'ACK timeout' and 'CTS timeout' three values.
Beacon Period: This item contains the length of the beacon interval.
Enter a value between 20 and 1000 to specify the Beacon Period.
DTIM Period: This item contains the number of Beacon intervals
between Delivery Traffic Indication Message (DTIM). Enter a
number between 1 and 255 to specify.
Fragment Threshold: It is the maximum frame size that wireless
device can transmit without fragmenting the frame. Enter a value
between 256 and 2346 to specify the Fragment Threshold.
RTS/CTS Threshold: Packets larger than the value are transmitted
by the RTS/CTS handshake. Enter a value between 1 and 2346 to
specify the value of the RTS /CTS Threshold.
Figure 3-8-19
Figure 3-8-20
159
Advertisement
Table of Contents
