Flash-Backed Write Cache Procedures - HP ProLiant DL385p Maintenance And Service Manual

Remove the serial label pull tab, and retain it for the new front panel assembly.
5.
Remove the air baffle (on page 31).
6.
Remove all drives
7.
If installed, remove the optical drive
8.
Remove the fan cage
9.
Disconnect all cables from the front panel assembly.
10.
IMPORTANT: If any cables in the front panel assembly need replacing, the entire front panel
assembly must be replaced.
Remove the four T-10 Torx screws from each side, and then remove the front panel assembly.
11.
To replace the component, reverse the removal procedure.

Flash-backed write cache procedures

Two types of procedures are provided for the FBWC option:
("Hot-plug drive" on page 36).
("Optical
("Fan cage" on page 41).
drive" on page 38).
Removal and replacement procedures 46