Remove the Systems Insight Display:
7.
Remove the screw from the rear of the Systems Insight Display.
a.
Disconnect the Systems Insight Display cable and the USB cable from the system board, and
b.
disconnect the USB cable from the front of the Systems Insight Display.
Remove the Systems Insight Display.
c.
To replace the component, reverse the removal procedure.
Front panel assembly
To remove the component:
Power down the server (on page 25).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Remove the server from the rack (on page 27).
3.
Remove the access panel
4.
("Access
panel" on page 30).
Removal and replacement procedures 45