HP ProLiant DL385p Maintenance And Service Manual page 55

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION: The heatsink thermal interface media is not reusable and must be replaced if the
heatsink is removed from the processor after it has been installed.
CAUTION: To avoid thermal shutdown, all fans must be installed in a dual processor
configuration.
To remove the component:
Power down the server (on page 25).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Extend ("Extend the server from the
3.
on page 27) the server from the rack.
Remove the access panel
4.
Remove the air baffle (on page 31).
5.
Remove the heatsink.
6.
rack" on page 26) or remove
("Access panel" on page 30).
("Remove the server from the
Removal and replacement procedures 55
rack"