Table of Contents
Advertisement
BACT.FILTER
As pressure measurement is infl uenced by the connection of a bacterial fi lter,
it must be specifi ed on the device whether or not a bacterial fi lter has been
connected.
Select whether a bacterial fi lter is connected (by the physician)
1. Select the complete menu (see page 35).
2. Use the selection keys
3. Press the the enter key
selection keys
4. Press the enter key
Yes or No. Confi rm your setting by pressing the enter key
Whenever a bacterial fi lter is connected to or removed from the device, it
is necessary to calibrate the device (see page 50).
BRIGHTNESS
You can set the brightness of the display from 0 % to 100 %.
This value determines the brightness of the display 30 seconds after the last key
was pressed. When a key is pressed, the display brightness is always 100 %
(50% during battery operation).
Setting the brightness
1. Select the complete menu (see page 35).
2. Use the selection keys
3. Press the enter key
the desired brightness.
4. Confi rm your setting by pressing the enter key
and
to select
and if necessary, input the PIN code with the
and
. Press the enter key
and then use the selection keys
and
to select
and then use the selection keys
.
.
Bact
Filter
after every digit.
and
.
Brightness
and
.
Device functions
to set
.
to set
55
Advertisement
Table of Contents
