Using The Device; Commissioning - Hoffrichter CPAP User Manual

USING THE DEVICE

COMMISSIONING

Before commissioning the device, read section „Safety Information" (start-
ing from page 12).
1. Set up the device according to the installation requirements (see page 13).
2. Connect the power supply to the device.
0
0 2
2 2
B 1
J A
3. Connect the mains cable to the power supply and its plug to a power socket.
4. The device starts up and successively displays a welcome text, the device
type, its software version and the current number of therapy hours and then
switches to the date and time display (standby mode).
5. Connect the therapy tube to the mask.
6. Connect the unattached end of the tube to the air outlet.
If you are using a bacterial fi lter, fi t it between the tube and air outlet.
28 Using the device