Table of Contents
Advertisement
MODE
(only point 2 AutoCPAP and point 2 BILEVEL ST20/ST25)
Selection of mode by the physician
1. Press the enter key
2. Use the selection keys
3. Press the the enter key
selection keys
4. Use the selection keys
your setting by pressing the enter key
PRESSURE
(only point 2 CPAP and point 2 AutoCPAP and point 2 BILEVEL ST20/25 in
CPAP mode)
Selection of pressure by the physician
When the pressure parameter is changed during therapy/titration, the
device adapts to the new setting slowly (25 Pa/s). This pressure ramp can
be deactivated using the TRENDset PC software.
point 2 CPAP:
1. Select the complete menu (see page 35).
2. Use the selection keys
3. Press the the enter key
selection keys
4. Press the enter key
the desired value. Confi rm your setting by pressing the enter key
42
Device functions
for 1 second.
and
to select
and if necessary, input the PIN code with the
and
. Press the enter key
and
to select the desired mode. Confi rm
and
to select
and if necessary, input the PIN code with the
and
. Press the enter key
and then use the selection keys
.
Mode
after every digit.
.
.
.
Press
after every digit.
and
to set
.
Advertisement
Table of Contents
