Table of Contents
Advertisement
WAKE UP TIME
Ex factory, the alarm clock function is not enabled. But it can be unlocked
by the physician or dealer with TRENDset PC software.
To activate the wake up alarm, press
wake up time is displayed for a short time. To deactivate the alarm, press
The activated alarm is indicated by a bell symbol on the display.
When the wake up alarm sounds, there are two options:
1. Press the ON/OFF key once to stop the alarm for the next 5 minutes
(Slumber mode) and twice to deactivate it completely.
2. Press
to end the alarm.
Setting the wake up time
1. Press the enter key
2. Use the selection keys
3. Press the enter key
the hour. Confi rm your setting by pressing the enter key
4. Use the selection keys
ting by pressing the enter key
. For checking purposes, the programmed
for 1 second.
and
to select
and then use the selection keys
and
to set the minutes. Confi rm your set-
.
.
Wake Time
and
.
Device functions
.
to set
41
Advertisement
Table of Contents
