Map Source - Humminbird SOLIX Operation Manual

M S
AP OURCE
The SOLIX includes built-in charts by Humminbird and Navionics. You can also install SD cards with additional chart information for
a particular location (separate purchase required).
Humminbird is the default map source, but you can change the map source at any time. When you install an SD card, the control
head automatically chooses the best map to display. If you install more than one SD card, you can choose which map source you
want to use.
Compatible Map Sources: Humminbird LakeMaster, AutoChart, SmartStrike, ChartSelect, and Navionics. Visit our Web site at
humminbird.com for compatibility details.
Install an SD Chart Card
Load Maps
Insert the SD card with the label facing left
Chart Overview
Install an SD Card
1. Insert the card into the slot with the label facing left.
2. The control head automatically chooses the best chart to display. If more than one type
of SD card is installed, follow the on-screen prompts to select the map source.
Eject an SD Card
1. Press the SD card into the slot and release. Pull the card from the slot.
WARNING! Do not leave the SD slot cover open. The slot cover should always be closed
to prevent water damage to the unit.
50