Humminbird SOLIX Operation Manual page 242

Copy Internal Images
If you have screen snapshots saved to the control head, use the following instructions to copy them to an SD card.
1. Install the SD card into the control head card slot.
2. Press the HOME key.
3. Select the Images tool.
4. Under Source, select Internal.
5. Press and hold one of the screen snapshots.
OR
Use the Joystick to select a screen snapshot. Press the MENU key.
6. Select Copy All.
7. Select a Save Location: Save to the SD Card (left slot = SD Card 1, right slot = SD Card 2).
8. Repeat the steps in this section on each control head.
2
| Check the Current Software Version
It is helpful to review the software version number that is currently installed on the control head and each accessory.
1. Press the HOME key.
2. Select Setting > Network > Network Info.
3. The Network Info dialog box shows a section for each device connected to the network. Scroll to each section to note the
software version number listed.
3
| Download Software Updates
1. Install the SD card into the PC card slot.
2. Go to humminbird.com, and select My Humminbird to sign in to your account.
3. Select the My Equipment tab. The available software updates are listed as Downloads under each registered product.
• Under Downloads, click the file name.
• Read the instructions in the dialog box and select Download.
• Follow the on-screen prompts to save the software file to the SD card.
4. Repeat step 3 to download the software updates posted to each registered product.
4
| Update Control Head Software
When you install the SD card with the software file, the control head will detect the update and provide an automatic prompt to install
the software. You can follow the prompts or choose to install the software at a later time through the Files tool. It is important to
review the following tips:
• Automatic Restart: The control head will restart during the software update process.
• Multiple Control Heads: If you have more than one control head on the network, go to each control head to install the latest
software update. Control Head software updates cannot be updated through another networked unit.
WARNING! Before the control head software is updated or restored to system defaults, export your menu settings, radar settings, and
navigation data. Copy your screen snapshots to an SD card. See Register Products and Back up Data for details.
242 Update Software