Navigation In Sonar Views (2D, Si, Di) - Humminbird SOLIX Operation Manual

N S
AVIGATION IN ONAR
To mark waypoints and start navigation, the control head must have a GPS fix from a connected or internal GPS receiver. The
navigation menus can be accessed from the X-Press Menu, touch screen, and the keypad.
Mark a Waypoint
You can mark a waypoint on the Sonar Views using the keypad or touch screen. You can also mark a waypoint at the vessel position
or the cursor position.
Mark a Waypoint at the Vessel Position
Touch Screen
1. Tap Sonar in the status bar.
2. Select Mark.
3. Select Waypoint.
Mark a Waypoint at the Cursor Position
Touch Screen
1. Press and hold a position on the Sonar View.
2. Select Waypoint.
distance and bearing to cursor position
V
IEWS
Marking a Waypoint (2D Sonar View)
Keypad
1. Press the MARK key twice.
Keypad
1. Use the Joystick to move the cursor to a position on
the Sonar View.
2. Press the MARK key twice.
show cursor exit cursor
197
(2D, SI, DI)
cursor
cursor position
Sonar & Navigation