Humminbird SOLIX Operation Manual page 212

Turn On/Off CHIRP Sonar
To view digital CHIRP sonar, CHIRP must be turned on. To view single frequency sonar, turn CHIRP off. You can also adjust the single
frequency range.
1. Press the HOME key.
2. Select Settings.
3. Select CHIRP Sonar.
4. Select 2D CHIRP, DI CHIRP, or SI CHIRP.
5. Tap the on/off button, or press the ENTER key, to turn it on or off.
Transducer Setup
Setting the 2D CHIRP Frequency Spectrum
Turning 2D CHIRP Sonar Off
212
set the frequency
spectrum for each beam
2D CHIRP
set to off
Set the single
frequency
range