Test Panel Application - Keithley DAS-800 series User Manual

Test Panel Application

5-2
5. Select the Logical Device you want to operate by dragging the pointer
in the Device Selection section. The Analog I/O Panel displays the
Scope, Meter, SST, and Level control tabs, depending on the
capabilities of your DAS-800 board.
6. The Scope uses two analog input channels, referred to as ChA and
ChB. Drag the channel selectors in the AI Channel Mapping section
to map them to different channel numbers.
7. The SST Signal Generator uses two analog output channels, referred
to as ChA and ChB. Drag the channel selectors in the AO Channel
Mapping section to map them to different channel numbers.
You can now select the Scope, Meter, SST and Level Control tabs to
operate your DAS-800 board.
Depending upon the DriverLINX drivers you have installed on your
system, you will have one or more of the following example applications:
Single-Value AI for analog input
Single-Value AO for analog output
PIO Panel for digital input and output
CTM Test Bench for counter/timer applications.
To access this DriverLINX Test Panel, select Test Panel with the "Test
Panel" item on the Windows start menu.
DriverLINX Analog I/O Panel