Troubleshooting Table
Symptom
Board does not respond
7-4
Table 7-1 lists general symptoms and possible solutions for problems with
DAS-800 Series boards. If your board is not operating properly after
using this information, refer to page 7-7 for instructions on getting
technical support.
Table 7-1. Troubleshooting Information
Possible Cause
Base address is unacceptable.
Possible Solution
Make sure that the base address
specified in the configuration file
matches the setting of the base
address switch block on the
board. Make sure that no other
system resource is using any of
the eight memory locations
starting at the specified base
address. Reconfigure the base
address, if necessary. Refer
topage 3-10 for instructions.
Troubleshooting