Driverlinx Analog I/O Panel - Keithley DAS-800 series User Manual

DriverLINX Analog I/O Panel

The DriverLINX Analog I/O Panel is an application that demonstrates
analog input/output using DriverLINX. With the Analog I/O Panel
you can:
Analyze analog signals using the simulated two-channel Oscilloscope
Measure analog voltages using the simulated Digital Volt Meter.
Generate Sine, Square and Triangle waves using the SST
Signal Generator.
Output DC Level voltages using the Level Control.
The Analog I/O Panel is useful for:
Testing the DAS-800 DriverLINX installation and configuration.
Verifying signal inputs to your DAS-800 board.
Sending test signals to external devices.
To access this DriverLINX Analog I/O Panel:
1. Start the Analog I/O Panel with the AIO Panel item on the Windows
start menu. Then perform the following steps:
2. Click the [...] button in the Driver Selection section.
3. Select the driver for your board using the Open DriverLINX dialog.
4. Click OK.
5
5-1