Installing Driverlinx - Keithley DAS-800 series User Manual

Installing DriverLINX

3-6
5. Determine whether your DAS-800 board can use your computer's
free resources.
6. Set any jumpers/switches to configure your DAS-800 board to use
your computer's free resources.
7. Set any other jumpers/switches to configure your DAS-800 board the
way you want.
8. Install your DAS-800 board into an appropriate free slot in
your computer.
Selecting the DriverLINX components to Install
For your convenience in installing and uninstalling just the DriverLINX
components you need, the DriverLINX CD Browser will assist you in
selecting the components to install:
– Install Drivers—This required component installs only the files
you need for configuring your hardware and running third-party
data-acquisition applications that require DriverLINX.
Install Interfaces—
–
and example programs that you will need to develop custom
applications for DriverLINX using C/C++, Visual Basic, Delphi,
and LabVIEW.
Install Documentation—
–
electronic documentation for DriverLINX that you can read,
search, and print using the Adobe Acrobat Reader.
Install Acrobat—
–
Acrobat Reader for the DriverLINX electronic documentation.
1. Insert the DriverLINX CD-ROM into your computer's
CD-ROM Drive.
2. Start the DriverLINX setup program. On most systems, wait a few
seconds for automatic startup. Otherwise, run the setup.exe program
from the CD-ROM.
This optional component installs the files
This optional component installs
This optional component installs the Adobe
Setup and Installation