Figure 4-7 Connecting Multiple Expansion Boards - Keithley DAS-800 series User Manual

Each EXP-16, EXP-16/A, or EXP-GP expansion board is
Note:
associated with an analog input channel on the DAS-800 Series board.
You specify the associated on-board channel by setting a jumper on the
expansion board. Make sure that you use a unique jumper setting for each
expansion board you are using. Refer to your expansion board
documentation for more information.
You can use the J2 connector on the last expansion board in the chain to
attach an STA-08 / STA-08PGA screw terminal accessory. This allows
you to access the remaining functions of the DAS-800 Series board.
Figure 4-7 illustrates how to connect two EXP-16 expansion boards, one
EXP-GP expansion board, and an STA-08 screw terminal accessory to a
DAS-800 board.
J2
J1 J2
J1 J2 J1
J1
J2
DAS-800
EXP-16 STA-08
EXP-16
EXP-GP
Board
Figure 4-7. Connecting Multiple Expansion Boards
You can also attach up to four MB-02 backplanes to a DAS-800
Note:
Series board using an STA-SCM8 screw terminal accessory and up to
four C-2600 cables. Refer to the MB Series User's Guide for
more information.
4-8 Cabling and Wiring