Supporting Software - Keithley DAS-800 series User Manual

Supporting Software

1-2
Hardware gate.
Four-word FIFO to store converted data; overrun detection logic to
detect lost data points.
Software-selectable interrupt source.
Three bits of digital input.
Four bits of digital output.
DAS-800 boards are enhancements of DAS-8 boards; DAS-801
Note:
boards are enhancements of DAS-8 PGA boards; DAS-802 boards are
enhancements of DAS-8 PGA/G2 boards. DriverLINX for DAS-800
Series does not support the older MetraByte DAS-8 Series. Both 16- and
32-bit support for the DAS-8 Series is available under Windows 95 only,
using a previous version of DriverLINX. Refer to the DriverLINX
Installation and Configuration Guide and Using DriverLINX With Your
Hardware—Configuring the DAS-800 Series manuals.
The following software is available for operating DAS-800 Series boards:
DAS-800 Series standard software package - Shipped with
DAS-800 Series boards. Includes DriverLINX
Windows and function libraries for writing application programs such
as Microsoft Visual C++; Microsoft Visual Basic; Borland Delphi
utility programs; and language-specific example programs.
DriverLINX - the high-performance real-time data-acquisition
device drivers for Windows application development includes:
DriverLINX API DLLs and drivers supporting the DAS-800
Series hardware
Analog I/O Panel - A DriverLINX program that verifies the
installation and configuration of DriverLINX to your
DAS-800 Series board and demonstrates several virtual
bench-top instruments
® ®
for Microsoft
Overview
®
;