Accessories - Keithley DAS-800 series User Manual

Accessories

1-4
The following accessories are available for use with DAS-800
Series boards:
STC-37 screw terminal connector - For all DAS-800 Series boards,
provides 37 screw terminals that allow you to access the functions of
the board; connects directly to the DAS-800 Series board without
a cable.
STA-08 screw terminal accessory - For the DAS-800 board only,
provides screw terminals that allow you to access the functions of the
board; provides a breadboard area with power and additional screw
terminals to access the user-designed circuitry.
STA-08PGA screw terminal accessory - For the DAS-801 and
DAS-802 boards only, provides screw terminals that allow you to
access the functions of the board; provides a breadboard area with
power and additional screw terminals to access the
user-designed circuitry.
EXP-16 and EXP-16/A expansion boards - Sixteen-channel
multiplexer and signal-conditioning expansion boards; provide cold
junction compensation (CJC) for thermocouples and
switch-selectable gains ranging from 0.5 to 2000.
EXP-GP expansion board - An 8-channel signal-conditioning
expansion board; connects to RTDs, thermistors, strain gages, and
other variable resistance sensors; provides CJC for thermocouples
and switch-selectable gains of 1, 10, 100, and 1000 or 2.5, 25, 250,
and 2500.
MB Series modules and backplanes - MB Series modules are
high-performance, signal-conditioning modules that measure
thermocouple, RTD, strain gage, voltage, and current inputs and are
installed in MB Series backplanes. MB Series backplanes provide
screw terminals for connecting the high-level analog I/O signals.
Overview