L2Tp Client - D-Link DWM-312 User Manual

Section 4 - Configuration
VPN-PPTP Client: Check Enable to enable the router to act as a L2TP client. If
enabled, the following options will appear:
ID:
Indicates the internal ID of the L2TP account for reference in the
Connection Status table.
Name:
Specify a name for the L2TP account for reference in the
Connection Status table. This name is for reference only and does
not affect functionality.
Peer IP/Domain:
Enter the IP address or domain of your VPN server.
User Name:
Enter the user name provided to you by your VPN operator.
Password:
Enter the password provided to you by your VPN operator.
Route:
Enter the route to which to bind the the VPN tunnel.
Connect: Select On Demand, Auto, or Manual.
Option:
Check the appropriate boxes to support Microsoft Point-to-Point
Encryption (MPPE) and Network Address Translation (NAT)
Enable:
Check this box to enable the VPN client.
D-Link DWM-312 User Manual

L2TP Client

35