D-Link DWM-312 User Manual page 30

Section 4 - Configuration
Enabled: Tick this box to enable this feature and click More to configure
VPN Dynamic IP on a separate page. Please see the next page
for more details.
Tunnel Name: Enter a name for your VPN.
Local Subnet: Enter the local (LAN) subnet. (ex. 192.168.0.0)
Local Netmask: Enter the local (LAN) subnet mask. (ex. 255.255.255.0)
Pase1 Key Life Enter the amount of time in seconds that the Phase 1 key should
Time: last.
Phase2 Key Life Enter the amount of time in seconds that the Phase 2 key should
Time: last.
Encapsulation Choose either ESP, AH or ESP+AH from the drop-down menu.
protocol:
PFS Group: Enable or Disable the PFS Group option using the drop-down
menu. PFS is an additional security protocol.
Aggressive Mode: Check this box to enable aggressive mode.
Preshare Key: Enter an ASCII passphrase in the box.
Local ID: Choose from Username, FQDN, User@FQDN, or Key ID using
the drop-down menu and then enter an ID in the box.
D-Link DWM-312 User Manual
Dynamic VPN Settings
26