Vpn; Ipsec; Vpn Settings - D-Link DWM-312 User Manual

Section 4 - Configuration
The DWM-312 supports a number of virtual private network (VPN) protocols. VPNs are used to create virtual private tunnels to remote VPN
gateways. The tunnel technology supports data confidentiality, data origin authentication, and data integrity of network information by utilizing
encapsulation protocols, encryption algorithms, and hashing algorithms. Supported protocols as a client include: IPSec, PPTP, L2TP, and GRE.
Supported protocols as a server include PPTP and L2TP.
VPN-IPSEC:
Tick this box to enable the IPSec VPN function.
Netbios over
Tick this box to receive Netbios from Network Neighborhood.

IPSEC:

NAT Traversal:
Some NAT routers and ISPs will block IPSec packets if they don't
support IPSec passthrough. If you connect to another NAT router
which doesn't support IPSec passthrough on the WAN side, you
need to activate this option.
Dyanmic VPN: Tick this box to enable this feature and click More to configure
VPN Dynamic IP on a separate page. Please see the next page for
more details.
Tunnel Settings: Tunnel details are displayed here. Click More to configure a
new tunnel or click Disconnect to disconnect from an existing
tunnel. Select the Enable checkbox to activate this rule. In tunnel
settings page, you can click More under Action for detailed tunnel
settings.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWM-312 User Manual

VPN

IPSec

VPN Settings

25