Lan; Ipv4; Lan Settings - D-Link DWM-312 User Manual

Section 4 - Configuration
This section allows you to change the local network settings of your router and to configure the DHCP Server settings. IPv4 and IPv6 are configured
seperately.
Router IP Address: Enter the IP address you want to use for the router. The default
IP address is 192.168.0.1. If you change the IP address, you will
need to enter the new IP address in your browser to get into the
configuration utility.
Default Subnet Enter the subnet mask of the router. The default subnet mask is
255.255.255.0.
Mask:
Local Domain Enter the local domain name for your network.
Name:
Dynamic Route: Click this to configure the Router Information Protocol (RIP),
described on the following page.
LAN Snooping: Click this to toggle LAN snooping, described on the following
page.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWM-312 User Manual

LAN

IPv4

LAN Settings

20