Connection Settings - D-Link DWM-312 User Manual

Section 4 - Configuration
Prefer Service Choose whether the DWM-312 should only use 4G networks, 3G
Type: networks, 2G networks, or use Auto Mode to automatically select
a network.
Allow Data Enabling this option will allow you to connect when roaming
Roaming: outside your carrier's home coverage.
Note: Roaming connections may incur additional fees from your
service provider.
Reconnect Choose Always when you want to establish mobile connection all
Mode: the time. Choose Manual to only connect when you click Connect
on the home screen. If you choose Connect-on-demand, the
device will establish a mobile connection when local users want to
connect to the Internet, and disconnect if there is no traffic after
the time period defined by the Maximum Idle Time setting.
Note: These options are only available if SIMA Only has been
selected in WAN Service on page 15.
If you have chosen Connect-on-demand, enter the maximum idle
Maximum Idle time before disconnection in seconds.
Time:
Specify IPv4, IPv6, or IPv4/IPv6 to determine what type of IP
IP Type: address will be allocated by your ISP. This information should be
provided by your ISP.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWM-312 User Manual

Connection Settings

15