Qos - D-Link DWM-312 User Manual

Section 4 - Configuration
The QoS Engine improve the performance of certain bandwidth or latency-sensitive applications by ensuring that your such traffic is prioritized
over other network traffic, such as FTP or web. For best performance, use the Automatic Classification option to automatically set the priority for
your applications.
Enable QOS Select this box to enable the QoS feature.
Packet Filter:
Upstream Specify the maximum upstream bandwidth here (e.g. 400 Kbps).
Bandwidth:
Use Schedule Select a schedule to use and copy to the specified rule ID when
you click the Copy to button. You may select Always On or use
Rule:
a specific schedule that you have defined. To create and edit
schedules, please refer to Schedules on page 45.
QOS RULES
ID: This identifies the rule.
Local IP : Ports: Specify the local IP address(es) and port(s) for the rule to affect.
Remote IP : Ports: Specify the remote IP address(es) and port(s) for the rule to affect.
QoS Priority:
Select what priority level to use for traffic affected by the rule:
Low, Normal, or High.
Enable:
Check the box to enable the specified rule.
Use Rule #:
Specify the schedule rule number. To create a new schedule,
click on the Add New Rule button. For more information about
schedules, please refer to Schedules on page 45.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWM-312 User Manual

QoS

45