Gre - D-Link DWM-312 User Manual

Section 4 - Configuration
The Generic Routing Encapsulation protocol (GRE) can be used to create tunnels
to compatible servers similar to IPSec.
ID: Displays the numeric ID of the tunnel.
Name: Enter the name of the IP tunnel for reference.
Tunnel IP: Enter the IP used to connect to the tunnel (optional).
Peer IP: Enter the remote IP of the GRE gateway. This is normally a public IP
address.
Key: Enter a key for the GRE connection.
TTL: Specifies the time to live in number of hops, up to 255.
Subnet: Specify a gateway to reach the GRE server. Specify a subnet (e.g.
10.0.0.2/24).
Enable: Check this box to enable the GRE tunnel.
Default Gateway: Select a default gateway from the drop down list.
Tunnels This table displays information about currently active tunnels.
Information:
ID: Displays the numeric ID of the tunnel
Transmitted Packets: Displays the number of packets sent.
Transmitted Bytes: Displays the number of bytes sent.
Received Packets: Displays the number of packets received.
Received Bytes: Displays the number of bytes received.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWM-312 User Manual

GRE

37