Pptp; Pptp Server - D-Link DWM-312 User Manual

Section 4 - Configuration
Server Seup: Check this box to enable the DWM-312's internal PPTP server. If
enabled, the following options will appear:
Authentication Select one or more authetication types for the server, either PAP,
Type: CHAP, MS_CHAP, or MS_CHAP2. Note that PAP and CHAP are
not compatible with encryption.
Server Virtual IP: Enter the address assigned to the server within the VPN. This will
dictate the IP pool for clients.
IP Pool Start Input the starting address for the server's IP pool, from 1 to 254.
Address:
IP Pool End Input the end address for the server's IP pool from 1 to 254. Note
Address: that this number must be higher than the start address.
Encryption: Check this box to enable PPTP encryption.
Encryption Specify the length of the encryption key.
Length:
User Account Up to 5 user accounts can be created for VPN access. Specify the
Setting: user names and passwords that will be used to connect to the
VPN server. Note that user names and passwords are visible to any
adminstrator.
D-Link DWM-312 User Manual

PPTP

PPTP Server

29