D-Link DWM-312 User Manual page 51

Section 4 - Configuration
ID: Indicates the ID of the user account.
User Name: Enter the user name of the account.
Password: Enter the password of the account.
Note: Passwords are stored in plaintext and are visible to anyone
with access to the web UI.
Authentication: If authNoPriv or authPriv is selected under Privacy Mode,
choose SHA1 or MD5 authentication.
Encryption: If authPriv is selected under Privacy Mode, DES encryption is
available.
Privacy Mode: Select NoauthNoPriv for no authentication and no encryption,
authNoPriv for authentication only, and authPriv to use both
authentication and encryption.
Privacy Key: If encryption is enabled, enter a key between 8 and 27 ASCII
characters in length.
Select Read to allow this user read-only access to configuration, or
Authority:
Read/Write to enable full read-write access.
Check Enable to activate the user account. Uncheck to disable the
Enable:
user account.
Click Edit to make changes to the corresponding account.
Actions:
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWM-312 User Manual
SNMP (Cont)
47