D-Link DWM-312 User Manual page 31

Section 4 - Configuration
Dead Peer Tick this box to enable Dead Peer Detection, then enter the time
Detection (DPD): in seconds after which a peer is determined to be no longer active.
You may also enter a delay period in seconds.
XAUTH: Select Server or None. If Server has been selected, set up XAUTH
user accounts in XAUTH Account on page 27.
Set IKE Proposal: Check this box to enable IKE Proposal.
Set IPSEC Check this box to enable IPSec Proposal.
Proposal:
IKE Proposal Use this area to Enable IKE Proposals. Then choose the
Settings: Encryption and Authentication types, as well as the DH Group
from the drop-down menus
IPSEC Proposal Use this area to Enable IPSec Proposals. Then choose the
Settings: Encryption and Authentication types from the drop-down
menus.
Click Apply to save your settings, or Refresh to revert to your
previous settings.
D-Link DWM-312 User Manual
Dynamic VPN Settings (Cont)
27