Omnik Omniksol-10k-TL3 User Manual page 34

The system will have the following status:
1. Waiting status: Display as Waiting XXX, XXX refers to the countdown time, will
display 1~3 numbers.
2. Flash status: Display as Flash
3. Fault status: Display as Fault XX, XX refers to error code, will display 1~2 numbers.
Power and EToday in this interface will change along with the change of number after
system operation.
System operation interface 2:
ETotal in this interface will change along with the change of number after system
operation.
System operation interface 3:
This interface displays the voltage and frequency of grid and the current which inverter
outputs to the grid.
32