Sq Off Momentary S Qm; The Voice Of Sub-Channel Is Half Of Main-Channel H Alf; Scan S Can; High/Low Power L Ow - Leixen UV-52 User Manual

will open the squelch, while pressing it again will
close the squelch again. If MOLO stays active for
more than 10 seconds, squelch will automatically
close.
（ ）
SQ OFF Momentary S QM
If the SQM shortcut is enabled, pressing it will disable
any CTCSS or DCS squelch, allowing any signal to
activate the receiver. Pressing this key will issue an
audible alert indicating the feature is active. Pressing
the key a second time will sound a different alert to
indicate that the receiver is in its normal state.
The voice of Sub-channel is half of main-channel
（ ）
H ALF
Pressing the HALF shortcut will enable/disable the
half function. When the "Half" enabled(ON), the
voice of the Sub-channel is half of the main-channel
when both two channels have signals in. So that you
can know where the voice from.
Scan （ S CAN ）
Pressing the LOW shortcut will toggle the power level
between HIGH and LOW power.
（ ）
High/Low Power L OW
Pressing the LOW shortcut will toggle the power level
between HIGH and LOW power.