Menu+2]Apro(Apro); Menu+4] Key Beep (Beep); B Clo; Menu+5]Channel Save - Leixen UV-52 User Manual

02 ．

[ MENU+2]APRO(APRO)

The audio processing menu allows you to set up the
compander and voice scrambler. You can set this
menu as :OFF, Compander(Comp), Scrambler (Scra) ,
TX Scrambler(TXSc), RX Scrambler(RX).
In A channel, you can only set this menu as: OFF or
TX Scrambler(TXSc)
03 ． [ MENU+3] Busy Channel Lock
When a Channel has the "BC LOCK" function
enabled, the ability to transmit is disabled on that
channel if it is active. You will again be able to
transmit on the channel when the channel is quiet.
This option can be set to "ON" or "OFF". The default
setting is OFF.
．
04

[ MENU+4] Key Beep (BEEP)

This function determines whether pressing keys on the
transceiver sound an audible confirmation beep when
they are pressed. It can be set to "ON" or "OFF". This
feature is turned on by default.
．
05

[ MENU+5]Channel Save

In VFO mode, store current frequency to XXX
memory channel through this menu. Stored channel
number can be selected via ▲▼ key, press Menu key
to confirm save and exit. There are two channel banks,
each bank has 199 channels. VFO A stored to Channel
A, VFO B stored to Channel B.
（

B CLO

（ ）

C Hsave

）