Monitor Lock (Molo); Sq Off Momentary (Sqm); Mute (Mute); Scan (Scan) - Leixen VV898 User Manual

Note: MONI can only be set as Long press.
Monitor Lock (MOLO)
When a shortcut key programmed as MaLO, the
radio would force to close weak signal to avoid
interference.
Press the shortcut key and release at once, squelch
open, green indicator light, the radio issue a "Cha Cha
Cha" sound. Press the shortcut key again, squelch
ends. If you do not manually close squelch, squelch
off automatically 10 seconds later.
SQ OFF Momentary (SQM)
When a shortcut key programmed as
SQM, the radio
would forced to close CTCSSIDCS to monitor signals.
Press
the shortcut key and release at once, the radio issue
"toot toot" sound,
monitor enabled, press the key again, the
radio issue a "toot" sound, monitor is off.
Note: SQM can only be set as Long press.
Mute
(MUTE)
When a shortcut key programmed as Mute, mute
would be enable or disable when press the shortcut
key. Speaker sound off when the shortcut key pressed,
and recovers sound until the key pressed again.
39
Scan (SCAN)
When a shortcut key programmed as scan function,
the radio start or end to scan when press the key.
High/Low Power
(LOW)
When a shortcut key programmed as LOW, the radio
would switch high and low power when press the key.
Emergency (EMG)
When a shortcut key programmed as EMG, the radio
would start emergency. When emergency starts, the
radio issues a sound of emergency, the screen displays
"TX Stop", and indicator lights alternate red and
green. The above performances disappear until PTT
key pressed or the radio power off.
VIM
Mode Switch
(VIM)
When a shortcut key programmed as VIM, channel B
of radio would switch between VFO mode and MR
mode when press the key.
DTMF Function (DTMF)
When a shortcut key programmed as DTMF, the radio
would switch DTMF function on or off when press
40