Monitor Momentary MONI
Setting a shortcut key to MONI will allow you to
temporarily open the receiver squelch, in order to hear
a weak signal that cannot break through at the current
squelch setting. Pressing MONI will open the
receiver's squelch, and releasing will close it again.
Note: MONI can only be set as Long press.
Monitor Lock MOLO
Setting MOLO will open the squelch to allow you to
listen for weaker signals. Pressing the MOLO shortcut
will open the squelch, while pressing it again will
close the squelch again. If MOLO stays active for
more than 10 seconds, squelch will automatically
close.
SQ OFF Momentary SQM
If the SQM shortcut is enabled, pressing it will disable
any CTCSS or DCS squelch, allowing any signal to
activate the receiver. Pressing this key will issue an
audible alert indicating the feature is active. Pressing
the key a second time will sound a different alert to
indicate that the receiver is in its normal state.
Note: SQM can only be set as Long press.
44